EMERSON – ASCO Solenoid Valve E314K035S1N01-24V CC, 3 port(s) , NC, 24 V dc, 1/4in

Κωδικός Προϊόντος της RS: 869-2262Κατασκευαστής: EMERSON – ASCOΚωδικός Κατασκευαστή: E314K035S1N01-24V CC
brand-logo
View all in Solenoid Valves

Τεχνικό φυλλάδιο

Προδιαγραφές

Supply Voltage

24 V dc

Number of Ports

3

Connection Size

1/4in

Connection

1/4 in G Female

Operation

Direct

Default Valve Position

NC

Suitable Applications

Air, Oil, Water

Type

3/2

Orifice Diameter

2.4mm

Series

E314K

Body Material

Brass

Maximum Working Pressure

10 (Air) bar, 6 (Oil) bar, 8 (Water) bar

Operating Temperature Range

-25 → +90 °C

Maximum Operating Temperature

+90°C

Connection Gender

Female

Minimum Operating Temperature

-25°C

Thread Standard or Connection Type

G

Maximum Opening Time

25ms

Flow Factor Kv

0.17m³/h

Χώρα Προέλευσης

Poland

Λεπτομέρειες Προϊόντος

Three-way, Direct Operated Valves, N/C

Direct operated solenoid valves with a stainless steel or brass body and NBR rubber seals. Fitted with a manual override and suitable for use with air, inert gases oil and water. ASCOs 314 series solenoid valves provide a compact solution for controlling single-acting actuators or filling and draining systems.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 171,43

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 212,57

Μονάδας (Including VAT) Με Φ.Π.Α

EMERSON – ASCO Solenoid Valve E314K035S1N01-24V CC, 3 port(s) , NC, 24 V dc, 1/4in

€ 171,43

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 212,57

Μονάδας (Including VAT) Με Φ.Π.Α

EMERSON – ASCO Solenoid Valve E314K035S1N01-24V CC, 3 port(s) , NC, 24 V dc, 1/4in
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Αγοράστε μαζικά

Quantity ΠοσότηταΤιμή μονάδας
1 - 4€ 171,43
5+€ 168,68

Τεχνικό φυλλάδιο

Προδιαγραφές

Supply Voltage

24 V dc

Number of Ports

3

Connection Size

1/4in

Connection

1/4 in G Female

Operation

Direct

Default Valve Position

NC

Suitable Applications

Air, Oil, Water

Type

3/2

Orifice Diameter

2.4mm

Series

E314K

Body Material

Brass

Maximum Working Pressure

10 (Air) bar, 6 (Oil) bar, 8 (Water) bar

Operating Temperature Range

-25 → +90 °C

Maximum Operating Temperature

+90°C

Connection Gender

Female

Minimum Operating Temperature

-25°C

Thread Standard or Connection Type

G

Maximum Opening Time

25ms

Flow Factor Kv

0.17m³/h

Χώρα Προέλευσης

Poland

Λεπτομέρειες Προϊόντος

Three-way, Direct Operated Valves, N/C

Direct operated solenoid valves with a stainless steel or brass body and NBR rubber seals. Fitted with a manual override and suitable for use with air, inert gases oil and water. ASCOs 314 series solenoid valves provide a compact solution for controlling single-acting actuators or filling and draining systems.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.