Schurter Push Button Nut for use with Fuse Holder, 0098.0093

Κωδικός Προϊόντος της RS: 876-7751Κατασκευαστής: SchurterΚωδικός Κατασκευαστή: 0098.0093
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Accessory Type

Nut

For Use With

Fuse Holder

Material

Plastic

Χώρα Προέλευσης

Switzerland

Λεπτομέρειες Προϊόντος

Schurter Fuseholder Mounting Accessories

Schurter Fuse Clips can be used in conjunction with schurter fuses to provide primary protection for electronic circuits. Fuse clips are available in a different mounting styles including solder and screw.

Panel Mounting

CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

P.O.A.

Schurter Push Button Nut for use with Fuse Holder, 0098.0093

P.O.A.

Schurter Push Button Nut for use with Fuse Holder, 0098.0093
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Τεχνικό φυλλάδιο

Προδιαγραφές

Accessory Type

Nut

For Use With

Fuse Holder

Material

Plastic

Χώρα Προέλευσης

Switzerland

Λεπτομέρειες Προϊόντος

Schurter Fuseholder Mounting Accessories

Schurter Fuse Clips can be used in conjunction with schurter fuses to provide primary protection for electronic circuits. Fuse clips are available in a different mounting styles including solder and screw.

Panel Mounting

CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.