4D Systems SK-28PTU-AR Resistive Touch Screen Starter Kit, Arduino Compatible Board
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
4D SystemsProduct Name
SK-28PTU-AR Resistive Touch Screen Starter Kit
Kit Classification
Starter Kit
Λεπτομέρειες Προϊόντος
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems LCD Touchscreens
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 195,65
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 242,61
Μονάδας Με Φ.Π.Α
1
€ 195,65
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 242,61
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
4D SystemsProduct Name
SK-28PTU-AR Resistive Touch Screen Starter Kit
Kit Classification
Starter Kit
Λεπτομέρειες Προϊόντος
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems LCD Touchscreens