Stud Cam Follower NUKR40-A, 18mm ID, 40mm OD
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
INARoller Diameter
40mm
Roller Length
20mm
Type
Stud
Bore Size
18mm
Static Load Rating
24900N
Dynamic Load Rating
18700N
Material
Steel
Λεπτομέρειες Προϊόντος
Stud Type Track Rollers
INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.
INA
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 149,22
€ 149,22 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 185,03
€ 185,03 Μονάδας Με Φ.Π.Α
1
€ 149,22
€ 149,22 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 185,03
€ 185,03 Μονάδας Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 149,22 |
| 5 - 9 | € 145,49 |
| 10 - 24 | € 144,58 |
| 25+ | € 143,62 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
INARoller Diameter
40mm
Roller Length
20mm
Type
Stud
Bore Size
18mm
Static Load Rating
24900N
Dynamic Load Rating
18700N
Material
Steel
Λεπτομέρειες Προϊόντος
Stud Type Track Rollers
INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole.
Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided.