Legris LF3000 Series Tee Threaded Adaptor, Push In 16 mm to Push In 16 mm, Threaded-to-Tube Connection Style
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisConnector A
Push In 16 mm
Connector B
Push In 16 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 3/8 Male
Manufacturer Series
LF3000
Thread Material
Brass
Maximum Operating Pressure
20 bar
Body Material
Plastic
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Standards Met
EC/42/2006
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
P.O.A.
Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
5
P.O.A.
Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
5
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
LegrisConnector A
Push In 16 mm
Connector B
Push In 16 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 3/8 Male
Manufacturer Series
LF3000
Thread Material
Brass
Maximum Operating Pressure
20 bar
Body Material
Plastic
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Standards Met
EC/42/2006
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.