Phoenix Contact3036026 STTB 2.5-PE Series Double Level Terminal Block, 0.08 → 4mm², Double-Level, Spring Clamp
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Phoenix ContactColour
Green/Yellow
Number of Levels
Double
Series
STTB 2.5-PE
American Wire Gauge
28 → 12AWG
Termination Method
Spring Clamp
Cable CSA
0.08 → 4mm²
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+110°C
Standards Met
cRUus, GL, PCT, VDE
Model Number
STTB 2,5-PE
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 10,13
Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
€ 12,561
Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α
5
€ 10,13
Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α
€ 12,561
Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α
5
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Phoenix ContactColour
Green/Yellow
Number of Levels
Double
Series
STTB 2.5-PE
American Wire Gauge
28 → 12AWG
Termination Method
Spring Clamp
Cable CSA
0.08 → 4mm²
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+110°C
Standards Met
cRUus, GL, PCT, VDE
Model Number
STTB 2,5-PE
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².