Sensata / Crydom DRC Series Series Solid State Contactor, 3-Pole, 2NO
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / CrydomNumber of Poles
3
Series
DRC Series
Normal State Configuration
2NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
12.5 mA → 32mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
18 V ac → 30 V ac, 18 V dc → 30 V dc
Maximum Operating Temperature
+80°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 121,54
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 150,71
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 121,54
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 150,71
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας |
---|---|
1 - 4 | € 121,54 |
5+ | € 117,11 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / CrydomNumber of Poles
3
Series
DRC Series
Normal State Configuration
2NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
12.5 mA → 32mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
18 V ac → 30 V ac, 18 V dc → 30 V dc
Maximum Operating Temperature
+80°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.