Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
SOIC
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+150 °C
Length
13mm
Height
2.35mm
Width
7.6mm
Dimensions
13 x 7.6 x 2.35mm
Λεπτομέρειες Προϊόντος
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 7,08
Μονάδας (Σε μία ράγα των 40) (Exc. Vat)Χωρίς Φ.Π.Α
€ 8,779
Μονάδας (Σε μία ράγα των 40) Με Φ.Π.Α
40
€ 7,08
Μονάδας (Σε μία ράγα των 40) (Exc. Vat)Χωρίς Φ.Π.Α
€ 8,779
Μονάδας (Σε μία ράγα των 40) Με Φ.Π.Α
40
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας | Per Ράγα |
---|---|---|
40 - 40 | € 7,08 | € 283,20 |
80 - 160 | € 6,91 | € 276,40 |
200+ | € 6,81 | € 272,40 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
SOIC
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+150 °C
Length
13mm
Height
2.35mm
Width
7.6mm
Dimensions
13 x 7.6 x 2.35mm
Λεπτομέρειες Προϊόντος
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.