Cirrus Logic CS8900A-CQ3Z, Ethernet Controller, 10Mbps AUI, ISA, 3.3 V, 100-Pin LQFP
Τεχνικό φυλλάδιο
Προδιαγραφές
Network Interface
AUI
Loopback Mode
External, Internal
DMA Support
Yes
Communication Mode
Full Duplex, Half Duplex
Auto-Negotiation
Yes
Host Interface
ISA
Maximum Operating Temperature
+70 °C
Physical Network Type
10Base2, 10Base5, 10BaseF, 10BaseT
Manufacturer Part No.
CW1L-M1E10QM4G
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Standard Supported
IEEE 802.3
Data Rate
10Mbps
Pin Count
100
Typical Operating Supply Voltage
3.3 V
Brand
Cirrus LogicPackage Type
LQFP
Dimensions
14 x 14 x 1.4mm
Λεπτομέρειες Προϊόντος
DIP24 Module for LPY403AL 2-Axis 30dps Analogue Gyroscope
This demonstration board is designed to facilitate the evaluation of the LPY403AL two-axis analogue-output gyroscope. The board offers an effective solution for fast system prototyping and device evaluation directly within the users own application.
Gyroscopes, STMicroelectronics
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
90
![sticker-730](https://cms.rsdelivers.com/repository-v1/Greece Label 3.jpg)
P.O.A.
90
![sticker-730](https://cms.rsdelivers.com/repository-v1/Greece Label 3.jpg)
Τεχνικό φυλλάδιο
Προδιαγραφές
Network Interface
AUI
Loopback Mode
External, Internal
DMA Support
Yes
Communication Mode
Full Duplex, Half Duplex
Auto-Negotiation
Yes
Host Interface
ISA
Maximum Operating Temperature
+70 °C
Physical Network Type
10Base2, 10Base5, 10BaseF, 10BaseT
Manufacturer Part No.
CW1L-M1E10QM4G
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Standard Supported
IEEE 802.3
Data Rate
10Mbps
Pin Count
100
Typical Operating Supply Voltage
3.3 V
Brand
Cirrus LogicPackage Type
LQFP
Dimensions
14 x 14 x 1.4mm
Λεπτομέρειες Προϊόντος
DIP24 Module for LPY403AL 2-Axis 30dps Analogue Gyroscope
This demonstration board is designed to facilitate the evaluation of the LPY403AL two-axis analogue-output gyroscope. The board offers an effective solution for fast system prototyping and device evaluation directly within the users own application.