Eaton, SD Surge Suppressor Unit 22 V ac, 32 V dc Maximum Voltage Rating 20kA Maximum Surge Current Surge Protection
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
EatonSuppressor Type
Surge Protection Device
Maximum Voltage Rating
22 V ac, 32 V dc
Mounting Type
DIN Rail
Maximum Surge Current
20kA
Series
SD
Length
7mm
Depth
109.6mm
Height
99mm
Dimensions
7 x 109.6 x 99mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+80°C
Λεπτομέρειες Προϊόντος
Eaton MTL Ultra Slim Loop Surge Protector - SD Series
The SD series of surge protector units from Eaton has an ultra-slim design for protecting electrical equipment against surges on control loop cabling. The SD surge protection devices use a hybrid protection circuit, combining sold state electronics and a gas-filled discharge tube (GDT). This combination is designed for exceptionally low line resistance and adds only a small voltage drop to the system whilst providing surge protection up to 20kA.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 333,48
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 413,52
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 333,48
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 413,52
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας |
---|---|
1 - 4 | € 333,48 |
5 - 9 | € 328,43 |
10+ | € 316,23 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
EatonSuppressor Type
Surge Protection Device
Maximum Voltage Rating
22 V ac, 32 V dc
Mounting Type
DIN Rail
Maximum Surge Current
20kA
Series
SD
Length
7mm
Depth
109.6mm
Height
99mm
Dimensions
7 x 109.6 x 99mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+80°C
Λεπτομέρειες Προϊόντος
Eaton MTL Ultra Slim Loop Surge Protector - SD Series
The SD series of surge protector units from Eaton has an ultra-slim design for protecting electrical equipment against surges on control loop cabling. The SD surge protection devices use a hybrid protection circuit, combining sold state electronics and a gas-filled discharge tube (GDT). This combination is designed for exceptionally low line resistance and adds only a small voltage drop to the system whilst providing surge protection up to 20kA.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.