Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ERNIBackplane Connector Type
High Speed
Gender
Male
Number Of Contacts
120
Number of Columns
10
Number Of Rows
8
Body Orientation
Vertical
Housing Material
Liquid Crystal Polymer
Pitch
1.5 (Horizontal) mm, 2.5 (Vertical) mm
Contact Material
Copper Alloy
Contact Plating
Gold over Nickel, Palladium Nickel
Current Rating
900mA
Termination Method
Press Fit
Series
ERmet ZD
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
ERNI ERmet ZD High Speed Differential Hard Metric Male Header Connectors
ERmet ZD High-Speed male backplane signal connectors designed for high-speed differential signalling in telecom applications at data rates of up to 5 Gbits/s. These ERmet ZD high-speed signal connectors have an optimised grid construction designed to reduce signal interference and improve RF characteristics. This grid layout also enables these ERmet ZD connectors to be integrated with conventional 2 mm HM or Eurocard connector systems (IEC 061076-4-101). The ERmet ZD connector has 3 connection levels to ensure reliable mating and ground shield and signal pins that mate sequentially at 1.5 mm intervals. Each pair of signal pins has an L shaped shield blade surrounding them which provides internal differential shielding. This shielding enables the connector to maintain high performance levels when faced with reflections and cross. The L shaped shields also offer protection to the signal contacts against damage caused by stubbing. The contacts of these ERmet ZD backplane high-speed signal connectors have a low noise, dual beam design. The inline layout of the signal and ground contacts allows easy and economical trace routing to be achieved. Press fit terminations allow simple and secure PCB mounting.
These ERmet ZD female connectors are 25 mm in length and are available in 2, 3 & 4 pair configurations.
ERNI ERmet ZD High Speed Differential Hard Metric Connector System
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
64
P.O.A.
64
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ERNIBackplane Connector Type
High Speed
Gender
Male
Number Of Contacts
120
Number of Columns
10
Number Of Rows
8
Body Orientation
Vertical
Housing Material
Liquid Crystal Polymer
Pitch
1.5 (Horizontal) mm, 2.5 (Vertical) mm
Contact Material
Copper Alloy
Contact Plating
Gold over Nickel, Palladium Nickel
Current Rating
900mA
Termination Method
Press Fit
Series
ERmet ZD
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
ERNI ERmet ZD High Speed Differential Hard Metric Male Header Connectors
ERmet ZD High-Speed male backplane signal connectors designed for high-speed differential signalling in telecom applications at data rates of up to 5 Gbits/s. These ERmet ZD high-speed signal connectors have an optimised grid construction designed to reduce signal interference and improve RF characteristics. This grid layout also enables these ERmet ZD connectors to be integrated with conventional 2 mm HM or Eurocard connector systems (IEC 061076-4-101). The ERmet ZD connector has 3 connection levels to ensure reliable mating and ground shield and signal pins that mate sequentially at 1.5 mm intervals. Each pair of signal pins has an L shaped shield blade surrounding them which provides internal differential shielding. This shielding enables the connector to maintain high performance levels when faced with reflections and cross. The L shaped shields also offer protection to the signal contacts against damage caused by stubbing. The contacts of these ERmet ZD backplane high-speed signal connectors have a low noise, dual beam design. The inline layout of the signal and ground contacts allows easy and economical trace routing to be achieved. Press fit terminations allow simple and secure PCB mounting.
These ERmet ZD female connectors are 25 mm in length and are available in 2, 3 & 4 pair configurations.