Phoenix Contact 3210169 PT 2.5-TWIN-MT Series Grey, 0.14 → 4mm², Single-Level, Push In Termination
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Series
PT 2.5-TWIN-MT
American Wire Gauge
26 → 12AWG
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Voltage Rating
400 V
Current Rating
20A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
PT 2,5-TWIN-MT
Distrelec Product Id
30401217
Χώρα Προέλευσης
Poland
Λεπτομέρειες Προϊόντος
Knife Disconnect Terminal Blocks MT/TG
Phoenix Contact brings you a great feed-through terminal block with knife disconnect option with PT Push-In technology. The integrated double function shaft located on the one side of the disconnect point and the integrated test contact on the other side provide for comfortable testing.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 50,60
€ 5,06 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 62,74
€ 6,274 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
10
€ 50,60
€ 5,06 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 62,74
€ 6,274 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
10
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Phoenix ContactColour
Grey
Number of Levels
Single
Series
PT 2.5-TWIN-MT
American Wire Gauge
26 → 12AWG
Termination Method
Push In
Cable CSA
0.14 → 4mm²
Voltage Rating
400 V
Current Rating
20A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
PT 2,5-TWIN-MT
Distrelec Product Id
30401217
Χώρα Προέλευσης
Poland
Λεπτομέρειες Προϊόντος
Knife Disconnect Terminal Blocks MT/TG
Phoenix Contact brings you a great feed-through terminal block with knife disconnect option with PT Push-In technology. The integrated double function shaft located on the one side of the disconnect point and the integrated test contact on the other side provide for comfortable testing.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.