RS PRO Hybrid Stepper Motor, 1.2Nm Torque, 3 V, 1.8°, 82.6 x 82.6mm Frame, 9.5mm Shaft
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProStepper Motor Type
Hybrid
Step Angle
1.8°
Holding Torque
1.2Nm
Number Of Wires
8
Supply Voltage
3 V
Frame Size
82.6 x 82.6mm
Shaft Diameter
9.5mm
Current Rating
2 A
Winding Arrangement
Unipolar
Shaft Length
121.4mm
Depth
62.5mm
Resistance Per Phase
1.5Ω
Standards Met
RoHS Compliant
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProStepper Motor Type
Hybrid
Step Angle
1.8°
Holding Torque
1.2Nm
Number Of Wires
8
Supply Voltage
3 V
Frame Size
82.6 x 82.6mm
Shaft Diameter
9.5mm
Current Rating
2 A
Winding Arrangement
Unipolar
Shaft Length
121.4mm
Depth
62.5mm
Resistance Per Phase
1.5Ω
Standards Met
RoHS Compliant
Χώρα Προέλευσης
Taiwan, Province Of China
Λεπτομέρειες Προϊόντος
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: