RS PRO Surge Suppressor Unit 253 V Maximum Voltage Rating 6.5kA Maximum Surge Current EMC Filter
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProSuppressor Type
EMC Filter
Maximum Voltage Rating
253 V
Mounting Type
DIN Rail
Maximum Surge Current
6.5kA
Series
MAXX
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+85°C
Λεπτομέρειες Προϊόντος
Surge & Noise Suppressor, MAxx / D Series
Combined surge and RFI filter units
Warning
Will not pass a 500V insulation test.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 360,22
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 446,67
Μονάδας Με Φ.Π.Α
1
€ 360,22
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 446,67
Μονάδας Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 1 | € 360,22 |
| 2 - 4 | € 351,12 |
| 5+ | € 337,89 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProSuppressor Type
EMC Filter
Maximum Voltage Rating
253 V
Mounting Type
DIN Rail
Maximum Surge Current
6.5kA
Series
MAXX
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+85°C
Λεπτομέρειες Προϊόντος
Surge & Noise Suppressor, MAxx / D Series
Combined surge and RFI filter units
Warning
Will not pass a 500V insulation test.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.