TE Connectivity Right Angle, Fluid Resistant Elastomer, 43mm
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityType
Right Angle
Inside Diameter Primary
43mm
Inside Diameter (Primary)
43mm
Inside Diameter Secondary
43mm
Inside Diameter (Secondary)
43mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrunk Diameter Primary
28.2mm
Shrunk Diameter (Primary)
28.2mm
Shrunk Diameter Secondary
9.9mm
Shrunk Diameter (Secondary)
9.9mm
Series
222K1
Χώρα Προέλευσης
Czech Republic
Λεπτομέρειες Προϊόντος
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 39,07
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 48,45
Μονάδας Με Φ.Π.Α
1
€ 39,07
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 48,45
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityType
Right Angle
Inside Diameter Primary
43mm
Inside Diameter (Primary)
43mm
Inside Diameter Secondary
43mm
Inside Diameter (Secondary)
43mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrunk Diameter Primary
28.2mm
Shrunk Diameter (Primary)
28.2mm
Shrunk Diameter Secondary
9.9mm
Shrunk Diameter (Secondary)
9.9mm
Series
222K1
Χώρα Προέλευσης
Czech Republic
Λεπτομέρειες Προϊόντος
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.