Bank Holiday

Τα γραφεία μας θα παραμείνουν κλειστά τη Δευτέρα 9 Ιουνίου. Οι παραγγελίες που θα τοποθετηθούν εκείνη την ημέρα θα προχωρήσουν την Τρίτη 10 Ιουνίου.

Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin

Κωδικός Προϊόντος της RS: 724-4660PΚατασκευαστής: Allegro MicrosystemsΚωδικός Κατασκευαστή: A1120LUA-T
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Sensor Type

Hall Effect Sensors

Mounting Type

Through Hole

Magnetic Type

Unipolar

Maximum Operating Supply Voltage

24 V

Minimum Operating Supply Voltage

3 V

Package Type

SIP

Height

3.02mm

Dimensions

4.09 x 1.52 x 3.02mm

Pin Count

3

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+150 °C

Typical Magnetic Sensor Hysteresis

10 Gs

Λεπτομέρειες Προϊόντος

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Hall Effect Sensors, Allegro MicroSystems

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 28,75

€ 1,15 Μονάδας (διαθέσιμο σε μία σακούλα) (Exc. Vat)Χωρίς Φ.Π.Α

€ 35,65

€ 1,426 Μονάδας (διαθέσιμο σε μία σακούλα) Με Φ.Π.Α

Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
Επιλέγξτε συσκευασία

€ 28,75

€ 1,15 Μονάδας (διαθέσιμο σε μία σακούλα) (Exc. Vat)Χωρίς Φ.Π.Α

€ 35,65

€ 1,426 Μονάδας (διαθέσιμο σε μία σακούλα) Με Φ.Π.Α

Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Επιλέγξτε συσκευασία

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Quantity ΠοσότηταΤιμή μονάδαςPer Σακούλα
25 - 95€ 1,15€ 5,75
100 - 245€ 0,99€ 4,95
250 - 495€ 0,99€ 4,95
500+€ 0,97€ 4,85

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Τεχνικό φυλλάδιο

Προδιαγραφές

Sensor Type

Hall Effect Sensors

Mounting Type

Through Hole

Magnetic Type

Unipolar

Maximum Operating Supply Voltage

24 V

Minimum Operating Supply Voltage

3 V

Package Type

SIP

Height

3.02mm

Dimensions

4.09 x 1.52 x 3.02mm

Pin Count

3

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+150 °C

Typical Magnetic Sensor Hysteresis

10 Gs

Λεπτομέρειες Προϊόντος

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Hall Effect Sensors, Allegro MicroSystems

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more