Honeywell BAF Series Top Plunger Limit Switch, 1NC/1NO, SPDT, Die Cast Aluminium Housing, 480V ac Max, 20A Max
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HoneywellActuator Type
Top Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
1NC/1NO
Maximum Current
20A
Housing Material
Die Cast Aluminium
Maximum AC Voltage
480V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
BAF
Action Type
Snap Action
Length
101.6mm
Maximum Operating Temperature
+71°C
Standards Met
CSA, UL
Minimum Operating Temperature
-32°C
Depth
33mm
Width
54.8mm
Mounting Orientation
Vertical
Operating Force
11.2 N
Λεπτομέρειες Προϊόντος
BAF Medium Duty Limit Switches
The BAF limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.
€ 309,76
€ 309,76 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 384,10
€ 384,10 Μονάδας Με Φ.Π.Α
1
€ 309,76
€ 309,76 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 384,10
€ 384,10 Μονάδας Με Φ.Π.Α
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HoneywellActuator Type
Top Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
1NC/1NO
Maximum Current
20A
Housing Material
Die Cast Aluminium
Maximum AC Voltage
480V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
BAF
Action Type
Snap Action
Length
101.6mm
Maximum Operating Temperature
+71°C
Standards Met
CSA, UL
Minimum Operating Temperature
-32°C
Depth
33mm
Width
54.8mm
Mounting Orientation
Vertical
Operating Force
11.2 N
Λεπτομέρειες Προϊόντος
BAF Medium Duty Limit Switches
The BAF limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.