Reliance 16bar Anti-Vacuum Valve With Male BSP 1/2 in BSP Male Connection

Κωδικός Προϊόντος της RS: 794-8316Κατασκευαστής: Reliance Water ControlsΚωδικός Κατασκευαστή: ADMT503001
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Connection

1/2 in BSP Male

Maximum Set Pressure

16bar

Maximum Temperature

+99°C

For Use With

Hot Water

Body Material

Brass

Connection Gender

Male

Thread Size

1/2in

Thread Standard or Connection Type

BSP

Χώρα Προέλευσης

Australia

Λεπτομέρειες Προϊόντος

Automatic Anti-Vacuum Valve

Automatic Anti-Vacuum Valve for use with hot water heaters to prevent a vacuum forming in installations where there is the potential of the draw off rate exceeding the rate of flow to the inlet; this can occur in properties with multiple outlets below the base of the hot water heater. The valve contains a check cartridge which under normal conditions is held closed by the system pressure. When a vacuum condition exists, the suction will cause the check cartridge to open and air to flow through, equalising the pressure within the hot water heater

Approvals

WRAS

€ 61,13

€ 61,13 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 75,80

€ 75,80 Μονάδας Με Φ.Π.Α

Reliance 16bar Anti-Vacuum Valve With Male BSP 1/2 in BSP Male Connection

€ 61,13

€ 61,13 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 75,80

€ 75,80 Μονάδας Με Φ.Π.Α

Reliance 16bar Anti-Vacuum Valve With Male BSP 1/2 in BSP Male Connection

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Quantity ΠοσότηταΤιμή μονάδας
1 - 4€ 61,13
5 - 9€ 60,17
10+€ 59,12

Τεχνικό φυλλάδιο

Προδιαγραφές

Connection

1/2 in BSP Male

Maximum Set Pressure

16bar

Maximum Temperature

+99°C

For Use With

Hot Water

Body Material

Brass

Connection Gender

Male

Thread Size

1/2in

Thread Standard or Connection Type

BSP

Χώρα Προέλευσης

Australia

Λεπτομέρειες Προϊόντος

Automatic Anti-Vacuum Valve

Automatic Anti-Vacuum Valve for use with hot water heaters to prevent a vacuum forming in installations where there is the potential of the draw off rate exceeding the rate of flow to the inlet; this can occur in properties with multiple outlets below the base of the hot water heater. The valve contains a check cartridge which under normal conditions is held closed by the system pressure. When a vacuum condition exists, the suction will cause the check cartridge to open and air to flow through, equalising the pressure within the hot water heater

Approvals

WRAS