TE Connectivity, DuraSeal Insulated Ring Terminal, M5 Stud Size, 0.5mm² to 1mm² Wire Size, Red
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Maximum Wire Size mm²
1mm²
Minimum Wire Size mm²
0.5mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Stud Size
M5
Colour
Red
Contact Plating
Tin
Contact Material
Copper
Overall Length
34.04mm
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
€ 41,84
€ 41,84 1 Κουτί των 25 (Exc. Vat)Χωρίς Φ.Π.Α
€ 51,88
€ 51,88 1 Κουτί των 25 Με Φ.Π.Α
1
€ 41,84
€ 41,84 1 Κουτί των 25 (Exc. Vat)Χωρίς Φ.Π.Α
€ 51,88
€ 51,88 1 Κουτί των 25 Με Φ.Π.Α
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 41,84 |
| 5 - 24 | € 37,82 |
| 25+ | € 31,06 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivitySeries
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Maximum Wire Size mm²
1mm²
Minimum Wire Size mm²
0.5mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Stud Size
M5
Colour
Red
Contact Plating
Tin
Contact Material
Copper
Overall Length
34.04mm
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed