Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
AicoCall Point Type
Wireless Fire Alarm System
Power Source
Battery
Tamper Resistant
Yes
Depth
58 mm
Height
85 mm
Width
85mm
Χώρα Προέλευσης
Ireland
Λεπτομέρειες Προϊόντος
RadioLINK Remote Manual Call Point
Allows manual alarm to warn other residents. Operates as a conventional break glass call point, but is totally wire free when used with the fire alarms in this range and the RadioLINK Multi Level Repeater Interconnect Base. Up to 12 RadioLINK units can be used in one system.
Standards
CE marked to indicate conformance to BS EN 60065 : 1998 (Electrical Safety), EN300220-1 V1.3.1 (2000-09) (RF Performance), EN30189 V1.4.1 (2002-08) (EMC) and has been 3rd party tested for electrical safety in accordance with Annex K of BS 5446 : Pt.1 : 2000.
Wireless Fire Alarm System
Interconnecting mains powered smoke alarms is essential to provide the earliest possible warning of a fire. By using wireless signals with the RadioLINK products in this range to interconnect smoke alarms, it is simpler and more convenient than using the conventional hard wired system. It is also easier to extend or change the system when required. The use of radio interconnection in Grade D alarm systems means that it is now much easier to comply with the extended alarm coverage recommended in BS 5839: Pt.6: 2004. As a guide, 30m should be the maximum distance between any of the alarms in the system.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
AicoCall Point Type
Wireless Fire Alarm System
Power Source
Battery
Tamper Resistant
Yes
Depth
58 mm
Height
85 mm
Width
85mm
Χώρα Προέλευσης
Ireland
Λεπτομέρειες Προϊόντος
RadioLINK Remote Manual Call Point
Allows manual alarm to warn other residents. Operates as a conventional break glass call point, but is totally wire free when used with the fire alarms in this range and the RadioLINK Multi Level Repeater Interconnect Base. Up to 12 RadioLINK units can be used in one system.
Standards
CE marked to indicate conformance to BS EN 60065 : 1998 (Electrical Safety), EN300220-1 V1.3.1 (2000-09) (RF Performance), EN30189 V1.4.1 (2002-08) (EMC) and has been 3rd party tested for electrical safety in accordance with Annex K of BS 5446 : Pt.1 : 2000.
Wireless Fire Alarm System
Interconnecting mains powered smoke alarms is essential to provide the earliest possible warning of a fire. By using wireless signals with the RadioLINK products in this range to interconnect smoke alarms, it is simpler and more convenient than using the conventional hard wired system. It is also easier to extend or change the system when required. The use of radio interconnection in Grade D alarm systems means that it is now much easier to comply with the extended alarm coverage recommended in BS 5839: Pt.6: 2004. As a guide, 30m should be the maximum distance between any of the alarms in the system.