Diodes Inc Fixed Shunt Voltage Reference 3V ±1.0 % 3-Pin SOT-23, LM4040D30FTA

Κωδικός Προϊόντος της RS: 165-8407Κατασκευαστής: DiodesZetexΚωδικός Κατασκευαστή: LM4040D30FTAIMPA: 0
brand-logo
View all in Voltage References

Τεχνικό φυλλάδιο

Προδιαγραφές

Reference Type

Fixed

Pin Count

3

Minimum Operating Temperature

-40 °C

Mounting Type

Surface Mount

Topology

Shunt

Maximum Operating Temperature

+125 °C

Nominal Voltage

3V

Initial Accuracy

±1.0 %

Width

1.4mm

Height

1.02mm

Maximum Output Current

15mA

Length

3.04mm

Package Type

SOT-23

Dimensions

3.04 x 1.4 x 1.02mm

Χώρα Προέλευσης

China

Λεπτομέρειες Προϊόντος

Tubular

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 0,33

Μονάδας (Σε ένα καρούλι των 3000) (Exc. Vat)Χωρίς Φ.Π.Α

€ 0,409

Μονάδας (Σε ένα καρούλι των 3000) (Including VAT) Με Φ.Π.Α

Diodes Inc Fixed Shunt Voltage Reference 3V ±1.0 % 3-Pin SOT-23, LM4040D30FTA
sticker-730

€ 0,33

Μονάδας (Σε ένα καρούλι των 3000) (Exc. Vat)Χωρίς Φ.Π.Α

€ 0,409

Μονάδας (Σε ένα καρούλι των 3000) (Including VAT) Με Φ.Π.Α

Diodes Inc Fixed Shunt Voltage Reference 3V ±1.0 % 3-Pin SOT-23, LM4040D30FTA
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
sticker-730

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Τεχνικό φυλλάδιο

Προδιαγραφές

Reference Type

Fixed

Pin Count

3

Minimum Operating Temperature

-40 °C

Mounting Type

Surface Mount

Topology

Shunt

Maximum Operating Temperature

+125 °C

Nominal Voltage

3V

Initial Accuracy

±1.0 %

Width

1.4mm

Height

1.02mm

Maximum Output Current

15mA

Length

3.04mm

Package Type

SOT-23

Dimensions

3.04 x 1.4 x 1.02mm

Χώρα Προέλευσης

China

Λεπτομέρειες Προϊόντος

Tubular

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more