Parker Straight Hose to Port Hose to Male BSP Parallel Pipe - Rigid (60° Cone), 1D948-8-8
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ParkerConnector A
Hose
Connector A - Thread Size
1/2 in Hose I.D.
Hydraulic Fitting Type
Straight Hose to Port
Connector B
Male BSP Parallel Pipe - Rigid (60° Cone)
Connector B - Thread Size
1/2"-14in
Connector B - Thread Size
1/2""-14in
Material
Steel
Finish
Zinc Plated
Connector A - Thread Standard
BSP
Connector B - Gender
Male
Maximum Operating Pressure
430bar
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+105°C
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
BSP Male Stud (DIN 3852 Form A)
Parkers Parkrimp No-Skive medium pressure fittings 48 series are permanent, crimp style hydraulic fittings that allow quick assembly with Parkrimp crimpers. Assembly of these fittings does not require removal of the outer cover of the hose. This eliminates premature hydraulic hose failure caused by skiving too long or short. The 48 series fittings are used with wire braided hydraulic hoses, water cleaning hoses, rail hoses with fire retardant cover and suction and return hoses.
Standards
SAE J1273 and ISO 17165-2
Self-Assembly Crimped Fittings
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 25,86
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 32,07
Μονάδας Με Φ.Π.Α
1
€ 25,86
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 32,07
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ParkerConnector A
Hose
Connector A - Thread Size
1/2 in Hose I.D.
Hydraulic Fitting Type
Straight Hose to Port
Connector B
Male BSP Parallel Pipe - Rigid (60° Cone)
Connector B - Thread Size
1/2"-14in
Connector B - Thread Size
1/2""-14in
Material
Steel
Finish
Zinc Plated
Connector A - Thread Standard
BSP
Connector B - Gender
Male
Maximum Operating Pressure
430bar
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+105°C
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
BSP Male Stud (DIN 3852 Form A)
Parkers Parkrimp No-Skive medium pressure fittings 48 series are permanent, crimp style hydraulic fittings that allow quick assembly with Parkrimp crimpers. Assembly of these fittings does not require removal of the outer cover of the hose. This eliminates premature hydraulic hose failure caused by skiving too long or short. The 48 series fittings are used with wire braided hydraulic hoses, water cleaning hoses, rail hoses with fire retardant cover and suction and return hoses.
Standards
SAE J1273 and ISO 17165-2