Schneider Electric PLC Cable for Use with Networking & Communication
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Schneider ElectricAccessory Type
Cable
For Use With
Networking & Communication
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
OTB and FTB Cables and Accessories
Connectors and pre-assembled cables for connection of OTB, FTB, Altivar31 and Lexium 05 via Modbus or CANopen
Schneider Electric Advantys
The Advantys range of distributed I/O and interface products from Schneider Electric eliminate traditional wiring methods and reduce associated time and costs by placing I/O connection interfaces in close proximity to sensors and actuators within an application.The Advantys OTB distributed I/O solution consists of a compact system (network interface and integrated I/O) with the addition of Twido I/O expansion modules.,To simplify sensor and actuator connections as well as linking commons, the Advantys OTB offer includes a commoning module (stock no. 612-0223). This module allows the through connection of the internal bus or network and enables connection of the commons in two isolated groups.,Configuration of I/O is made using respective controller software but to aid with this a separate configuration tool is available for the Twido controller.,Each base incorporates 20 I/O:
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 119,63
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 148,34
Μονάδας Με Φ.Π.Α
1
€ 119,63
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 148,34
Μονάδας Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 119,63 |
| 5 - 9 | € 116,58 |
| 10+ | € 114,66 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Schneider ElectricAccessory Type
Cable
For Use With
Networking & Communication
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
OTB and FTB Cables and Accessories
Connectors and pre-assembled cables for connection of OTB, FTB, Altivar31 and Lexium 05 via Modbus or CANopen
Schneider Electric Advantys
The Advantys range of distributed I/O and interface products from Schneider Electric eliminate traditional wiring methods and reduce associated time and costs by placing I/O connection interfaces in close proximity to sensors and actuators within an application.The Advantys OTB distributed I/O solution consists of a compact system (network interface and integrated I/O) with the addition of Twido I/O expansion modules.,To simplify sensor and actuator connections as well as linking commons, the Advantys OTB offer includes a commoning module (stock no. 612-0223). This module allows the through connection of the internal bus or network and enables connection of the commons in two isolated groups.,Configuration of I/O is made using respective controller software but to aid with this a separate configuration tool is available for the Twido controller.,Each base incorporates 20 I/O: