Texas Instruments USBN9603-28M/NOPB, USB Controller, USB 1.0, USB 1.1, 5 V, 28-Pin SOIC W
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Texas InstrumentsNumber of Transceivers
1
Protocols Supported
USB 1.0, USB 1.1
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
5 V
Mounting Type
Surface Mount
Package Type
SOIC W
Pin Count
28
Dimensions
17.91 x 7.49 x 2.34mm
Height
2.34mm
Length
17.91mm
Maximum Operating Temperature
+70 °C
Width
7.49mm
Minimum Operating Temperature
0 °C
Λεπτομέρειες Προϊόντος
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
26
P.O.A.
26
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Texas InstrumentsNumber of Transceivers
1
Protocols Supported
USB 1.0, USB 1.1
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
5 V
Mounting Type
Surface Mount
Package Type
SOIC W
Pin Count
28
Dimensions
17.91 x 7.49 x 2.34mm
Height
2.34mm
Length
17.91mm
Maximum Operating Temperature
+70 °C
Width
7.49mm
Minimum Operating Temperature
0 °C
Λεπτομέρειες Προϊόντος
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.