Alpha Wire Hookup Wire TEFLON Series Brown Hook Up Wire, 28 AWG 7 x, 0.13 mm core strands, 305 m,

Belden Hookup Wire TEFLON Series Hook Up Wire, 305m Cable Length, Brown Jacket - 5852 BR001

This hook-up wire is a PTFE-insulated conductor designed for electrical interconnections where a wide temperature range and flame-retardant performance are required. It combines a multi-strand silver-plated copper core with a thin polytetrafluoroethylene jacket to support installations subject to elevated heat, controlled environments and systems requiring a 600V rating.

Features & Benefits

• Silver-plated copper conductor reduces contact resistance and corrosion
  7-strand construction improves flexing for repeated movement
  0.08 mm² cross section supports Compact wiring density
  Operates from −60°C to 200°C for thermal resilience
  Flame-retardant insulation enhances circuit safety under fault conditions
  600V rating enables use on many low-voltage power and control circuits

**Applications**

• Suitable for aerospace wiring harnesses requiring high-temperature tolerance
  Ideal for industrial control cabinets with Compact terminations
  Used for automation sensor and actuator internal wiring
  Can be used for high-density electronic assemblies and cable looms

What is the conductor composition and its practical advantage?

The core is silver-plated copper in seven strands which offers good conductivity with improved solderability and reduced oxidation for reliable terminations.

How is the product supplied for installation lengths?

It is available on long runs including continuous 100m lengths and larger reels offered in 305m format for reduced jointing.

What mechanical handling limits should be observed during routing?

Maintain a minimum bend radius of 10x the cable diameter and avoid pull tensions above the specified maximum to prevent conductor or insulation damage.

Which regulatory substance restrictions apply to this item?

Materials comply with EU RoHS directives and REACH listings
no SVHCs exceed 0.1% by mass as reported.

What electrical and thermal properties are relevant for design calculations?

Use the 600 VRMS voltage rating, nominal inductance of 0.07 μH/ft and conductor DCR of 60 Ω/1000 ft at 20°C for engineering assessments.