Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProMaximum Pressure Measurement
4bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Mount Type
Flush
Maximum Operating Temperature
125°C
IP Rating
IP65
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
This RS PRO pressure switch can measure the pressure exerted by liquid and gaseous media from 0 bar to 4 bar. The sensor's case is made from 303-grade stainless steel, so it won't be corroded by contact with the gas or liquid being measured, or contaminate the medium.
It converts pressure into an analogue electrical signal of 4 mA to 20 mA, which is directly proportional to the pressure being measured. A 1/4-inch threaded connector physically connects the switch to the pressure chamber. Electrical connections are made using a two-wire output via cable gland and screw terminal or M12 connector. You can power the sensor with a DC voltage of between 10 V and 30 V.
You'll find this product can be used in temperatures from -20°C to +125°C. These characteristics make it suitable for use in a wide range of applications, including the medical, aviation, automotive, and marine fields.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 270,14
€ 270,14 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 334,97
€ 334,97 Μονάδας Με Φ.Π.Α
1
€ 270,14
€ 270,14 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 334,97
€ 334,97 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProMaximum Pressure Measurement
4bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Mount Type
Flush
Maximum Operating Temperature
125°C
IP Rating
IP65
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
This RS PRO pressure switch can measure the pressure exerted by liquid and gaseous media from 0 bar to 4 bar. The sensor's case is made from 303-grade stainless steel, so it won't be corroded by contact with the gas or liquid being measured, or contaminate the medium.
It converts pressure into an analogue electrical signal of 4 mA to 20 mA, which is directly proportional to the pressure being measured. A 1/4-inch threaded connector physically connects the switch to the pressure chamber. Electrical connections are made using a two-wire output via cable gland and screw terminal or M12 connector. You can power the sensor with a DC voltage of between 10 V and 30 V.
You'll find this product can be used in temperatures from -20°C to +125°C. These characteristics make it suitable for use in a wide range of applications, including the medical, aviation, automotive, and marine fields.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
