4D Systems, gen4 2.4in Arduino Compatible Display with Resistive Touch Screen
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
4D SystemsDiagonal Display Size
2.4in
Display Technology
Resistive Touch Screen
Display Resolution
240 x 320pixel
Viewing Area Dimensions
36.72 x 48.96mm
Dimensions
44.7 x 74.75 x 15.9mm
For Use With
Arduino
Series
gen4
Λεπτομέρειες Προϊόντος
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems LCD Touchscreens
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 135,18
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 167,62
Μονάδας Με Φ.Π.Α
1
€ 135,18
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 167,62
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
4D SystemsDiagonal Display Size
2.4in
Display Technology
Resistive Touch Screen
Display Resolution
240 x 320pixel
Viewing Area Dimensions
36.72 x 48.96mm
Dimensions
44.7 x 74.75 x 15.9mm
For Use With
Arduino
Series
gen4
Λεπτομέρειες Προϊόντος
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems LCD Touchscreens