ABB Smile 12 EA Series Emergency Stop Push Button, Surface Mount, 2NC, IP65
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ABBMounting Type
Surface Mount
Contact Configuration
2NC
Illuminated
No
Series
Smile 12 EA
IP Rating
IP65
Voltage Rating
24V dc
Depth
52mm
Width
40mm
Height
84mm
Push Button Material
Plastic
Bezel Material
Plastic
Χώρα Προέλευσης
Sweden
Λεπτομέρειες Προϊόντος
Smile Tina E-Stop for Vital/Pluto
Smile Tina from ABB is very easy to install, especially on aluminium extrusions. There are three different versions available, either with one or two M12 connections or cable. Two M12 connectors are used to enable the connection of E-stops in series, which is often used with dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED indicates the actual status according to the dynamic system. Smile Tina from ABB is intended for use in safety circuits in accordance with EN 60204-1.
Approvals
CE, TUV
Standards
EN ISO 12100-1, EN ISO 12100-2, EN 60204-1, EN 954-1, EN ISO 13849-1, EN 62061, IEC 60947-5-1
P.O.A.
1
P.O.A.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ABBMounting Type
Surface Mount
Contact Configuration
2NC
Illuminated
No
Series
Smile 12 EA
IP Rating
IP65
Voltage Rating
24V dc
Depth
52mm
Width
40mm
Height
84mm
Push Button Material
Plastic
Bezel Material
Plastic
Χώρα Προέλευσης
Sweden
Λεπτομέρειες Προϊόντος
Smile Tina E-Stop for Vital/Pluto
Smile Tina from ABB is very easy to install, especially on aluminium extrusions. There are three different versions available, either with one or two M12 connections or cable. Two M12 connectors are used to enable the connection of E-stops in series, which is often used with dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED indicates the actual status according to the dynamic system. Smile Tina from ABB is intended for use in safety circuits in accordance with EN 60204-1.
Approvals
CE, TUV
Standards
EN ISO 12100-1, EN ISO 12100-2, EN 60204-1, EN 954-1, EN ISO 13849-1, EN 62061, IEC 60947-5-1