ADAFRUIT GEMMA V2 Wearable Development Board 1222

Κωδικός Προϊόντος της RS: 124-5508Κατασκευαστής: ADAFRUIT INDUSTRIESΚωδικός Κατασκευαστή: 1222
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Classification

Development Board

Kit Name

GEMMA V2

Technology

Wearable

Processor Part Number

ATtiny85

Processor Type

MCU

Λεπτομέρειες Προϊόντος

Adafruit GEMMA Wearable Platform v2

GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.

This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.

The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.

Adafruit GEMMA Wearable Platform

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 15,20

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 18,85

Μονάδας (Including VAT) Με Φ.Π.Α

ADAFRUIT GEMMA V2 Wearable Development Board 1222

€ 15,20

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 18,85

Μονάδας (Including VAT) Με Φ.Π.Α

ADAFRUIT GEMMA V2 Wearable Development Board 1222
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Αγοράστε μαζικά

Quantity ΠοσότηταΤιμή μονάδας
1 - 4€ 15,20
5 - 9€ 13,51
10+€ 11,97

Τεχνικό φυλλάδιο

Προδιαγραφές

Classification

Development Board

Kit Name

GEMMA V2

Technology

Wearable

Processor Part Number

ATtiny85

Processor Type

MCU

Λεπτομέρειες Προϊόντος

Adafruit GEMMA Wearable Platform v2

GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.

This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.

The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.

Adafruit GEMMA Wearable Platform