Allen Bradley 440N Series Magnetic Non-Contact Safety Switch, 24V dc, Plastic Housing, NC, 2m Cable
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Allen BradleySupply Voltage
24V dc
Safety Contacts
NC
Housing Material
Plastic
Connection Type
2m Cable
Actuator Type
Magnetic
Safety Category
1
Sensor Principle
Magnetic
Actuator Included
Yes
Switching Distance
12 mm
Range
Ferrogard
Series
440N
IP Rating
IP67
Supply Current
1A
Length
84mm
Depth
16mm
Width
19mm
Χώρα Προέλευσης
Dominican Republic
Λεπτομέρειες Προϊόντος
Allen Bradley Guardmaster Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch
Enhance the safety and security of your machine guards and provide essential protection for personnel with the Ferrogard FRS, 6 9 and 10 by Allen Bradley Guardmaster. These magnetically actuated non-contact safety switches are specially designed to be installed on guard doors and work by immediately cutting off the power supply to a machine when the safety guard or gate is opened, thereby restricting unsafe access for personnel to a hazardous area. The magnetic actuator is removed from the switch when the door is released, which then opens the NC safety contacts.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 219,75
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 272,49
Μονάδας Με Φ.Π.Α
1
€ 219,75
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 272,49
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Allen BradleySupply Voltage
24V dc
Safety Contacts
NC
Housing Material
Plastic
Connection Type
2m Cable
Actuator Type
Magnetic
Safety Category
1
Sensor Principle
Magnetic
Actuator Included
Yes
Switching Distance
12 mm
Range
Ferrogard
Series
440N
IP Rating
IP67
Supply Current
1A
Length
84mm
Depth
16mm
Width
19mm
Χώρα Προέλευσης
Dominican Republic
Λεπτομέρειες Προϊόντος
Allen Bradley Guardmaster Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch
Enhance the safety and security of your machine guards and provide essential protection for personnel with the Ferrogard FRS, 6 9 and 10 by Allen Bradley Guardmaster. These magnetically actuated non-contact safety switches are specially designed to be installed on guard doors and work by immediately cutting off the power supply to a machine when the safety guard or gate is opened, thereby restricting unsafe access for personnel to a hazardous area. The magnetic actuator is removed from the switch when the door is released, which then opens the NC safety contacts.