Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Alpha WireProduct Type
Cable Sleeve
Colour
Natural
Material
Polytetrafluoroethylene
Sleeve Length
30m
Braided
No
Minimum Cable Diameter
1.82mm
Maximum Cable Diameter
2.08mm
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
260°C
Standards/Approvals
No
Dielectric Strength
55.118kV/mm
Wall Thickness
0.41mm
Series
FIT Wire Management
Λεπτομέρειες Προϊόντος
This cable sleeve provides insulated protection for wiring in demanding industrial and electronic settings. Constructed from polytetrafluoroethylene, it offers a lightweight, non-braided solution in a natural finish supplied on a 30m roll. The product is suited to environments requiring a Compact protective cover for small-diameter wiring.
The polymer remains functional from low-temperature service down to minus 75°C and up to 260°C, covering cryogenic tolerance through elevated oven-like conditions.
The material exhibits a high dielectric capability of 870 V/mil, providing robust insulation where voltage separation is required.
The internal diameter accepts cables whose diameters fall between 1.82mm and 2.08 mm, accommodating small single-core and insulated jumper wires.
The wall thickness is 0.41 mm, offering a low-profile barrier that preserves flexibility while maintaining mechanical separation.
It is manufactured without braiding, which reduces stiffness and simplifies routing through tight bends and constrained assemblies.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 376,35
€ 376,35 1 Καρούλι των 30 Μέτρων (Exc. Vat)Χωρίς Φ.Π.Α
€ 466,67
€ 466,67 1 Καρούλι των 30 Μέτρων Με Φ.Π.Α
1
€ 376,35
€ 376,35 1 Καρούλι των 30 Μέτρων (Exc. Vat)Χωρίς Φ.Π.Α
€ 466,67
€ 466,67 1 Καρούλι των 30 Μέτρων Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 376,35 |
| 5 - 9 | € 368,78 |
| 10+ | € 360,77 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Alpha WireProduct Type
Cable Sleeve
Colour
Natural
Material
Polytetrafluoroethylene
Sleeve Length
30m
Braided
No
Minimum Cable Diameter
1.82mm
Maximum Cable Diameter
2.08mm
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
260°C
Standards/Approvals
No
Dielectric Strength
55.118kV/mm
Wall Thickness
0.41mm
Series
FIT Wire Management
Λεπτομέρειες Προϊόντος
This cable sleeve provides insulated protection for wiring in demanding industrial and electronic settings. Constructed from polytetrafluoroethylene, it offers a lightweight, non-braided solution in a natural finish supplied on a 30m roll. The product is suited to environments requiring a Compact protective cover for small-diameter wiring.
The polymer remains functional from low-temperature service down to minus 75°C and up to 260°C, covering cryogenic tolerance through elevated oven-like conditions.
The material exhibits a high dielectric capability of 870 V/mil, providing robust insulation where voltage separation is required.
The internal diameter accepts cables whose diameters fall between 1.82mm and 2.08 mm, accommodating small single-core and insulated jumper wires.
The wall thickness is 0.41 mm, offering a low-profile barrier that preserves flexibility while maintaining mechanical separation.
It is manufactured without braiding, which reduces stiffness and simplifies routing through tight bends and constrained assemblies.
