Analog Devices TruPwr ADL5511 RF Envelope, RMS Detector Evaluation Board 6GHz ADL5511-EVALZ
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Analog DevicesRF Technology
RF Envelope, RMS Detector
Kit Classification
Evaluation Board
Featured Device
ADL5511
Frequency
6GHz
Kit Name
TruPwr
Λεπτομέρειες Προϊόντος
Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector
The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1.
RF & Microwave, Analog Devices
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 312,28
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 387,23
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 312,28
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 387,23
Μονάδας (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Analog DevicesRF Technology
RF Envelope, RMS Detector
Kit Classification
Evaluation Board
Featured Device
ADL5511
Frequency
6GHz
Kit Name
TruPwr
Λεπτομέρειες Προϊόντος
Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector
The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1.