APEM 1 Way Rocker Switch Mounting Panel K Series
Technical Document
Specifications
Brand
ApemAccessory Type
Mounting Panel
For Use With
KI, KL, KR
Series
K
Number of Ways
1
Country of Origin
France
Product details
KR Series Accessories
End and middle panels housings, which dovetail into each other, enable a side stacked cluster of KR rocker switch cases, to be assembled and positioned into a long panel slot
For mounting end panel housing order RS507-611 and for middle panel housing, order 507-615
A black panel blanking plug 507-318, useful for future switch extensions, is also available
Actuators can be removed with 507-312 tools (supplied in pairs), by placing the 2 claws under the support and pushing as indicated on the arrow on the tool
If panel mounting housings are used, assembled switches can be removed by inserting 2 tools between the switch and panel units, from the rear, to compress the snap in device
IP68 Modular KR Series
€ 4.78
€ 4.78 Each (Exc. Vat)
€ 5.93
€ 5.93 Each (inc. VAT)
1
€ 4.78
€ 4.78 Each (Exc. Vat)
€ 5.93
€ 5.93 Each (inc. VAT)
1
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price |
|---|---|
| 1 - 24 | € 4.78 |
| 25 - 99 | € 4.65 |
| 100 - 249 | € 3.29 |
| 250 - 499 | € 3.24 |
| 500+ | € 3.13 |
Technical Document
Specifications
Brand
ApemAccessory Type
Mounting Panel
For Use With
KI, KL, KR
Series
K
Number of Ways
1
Country of Origin
France
Product details
KR Series Accessories
End and middle panels housings, which dovetail into each other, enable a side stacked cluster of KR rocker switch cases, to be assembled and positioned into a long panel slot
For mounting end panel housing order RS507-611 and for middle panel housing, order 507-615
A black panel blanking plug 507-318, useful for future switch extensions, is also available
Actuators can be removed with 507-312 tools (supplied in pairs), by placing the 2 claws under the support and pushing as indicated on the arrow on the tool
If panel mounting housings are used, assembled switches can be removed by inserting 2 tools between the switch and panel units, from the rear, to compress the snap in device