Assemtech SPCO PCB Reed Switch 200 mA 30 V ac/dc
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
AssemtechProduct Type
Reed Switch
Contact Configuration
SPCO
Maximum Switching Current
200mA
Maximum Switching Power
3VA
Maximum Switching Voltage
30V ac/dc
Contact Resistance
100mΩ
Contact Material
Rhodium
Maximum Release Time
0.5ms
Operating Time Including Bounce
1ms
Terminal Type
Wire
AT Value Range
15 to 30 AT
Mount Type
PCB
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Width
2.54 mm
Length
56.5mm
Standards/Approvals
ISO
Series
GC
Λεπτομέρειες Προϊόντος
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 12,24
€ 12,24 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 15,18
€ 15,18 Μονάδας Με Φ.Π.Α
1
€ 12,24
€ 12,24 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 15,18
€ 15,18 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 14 | € 12,24 |
| 15 - 49 | € 11,80 |
| 50 - 99 | € 10,91 |
| 100 - 499 | € 10,10 |
| 500+ | € 10,00 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
AssemtechProduct Type
Reed Switch
Contact Configuration
SPCO
Maximum Switching Current
200mA
Maximum Switching Power
3VA
Maximum Switching Voltage
30V ac/dc
Contact Resistance
100mΩ
Contact Material
Rhodium
Maximum Release Time
0.5ms
Operating Time Including Bounce
1ms
Terminal Type
Wire
AT Value Range
15 to 30 AT
Mount Type
PCB
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Width
2.54 mm
Length
56.5mm
Standards/Approvals
ISO
Series
GC
Λεπτομέρειες Προϊόντος
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA