Assemtech SPST-NO PCB Reed Switch 1 A 200 V ac/dc
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
AssemtechProduct Type
Reed Switch
Contact Configuration
SPST-NO
Maximum Switching Current
1A
Maximum Switching Power
40W
Maximum Switching Voltage
200V ac/dc
Contact Resistance
90mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.35ms
AT Value Range
46 to 70 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
2.7 mm
Maximum Operating Temperature
125°C
Length
20.5mm
Standards/Approvals
ISO
Series
RI
Χώρα Προέλευσης
Belgium
Λεπτομέρειες Προϊόντος
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 9,90
€ 0,99 Μονάδας (Σε μία Σακούλα των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 12,28
€ 1,228 Μονάδας (Σε μία Σακούλα των 10) Με Φ.Π.Α
10
€ 9,90
€ 0,99 Μονάδας (Σε μία Σακούλα των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 12,28
€ 1,228 Μονάδας (Σε μία Σακούλα των 10) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
10
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
AssemtechProduct Type
Reed Switch
Contact Configuration
SPST-NO
Maximum Switching Current
1A
Maximum Switching Power
40W
Maximum Switching Voltage
200V ac/dc
Contact Resistance
90mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.35ms
AT Value Range
46 to 70 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
2.7 mm
Maximum Operating Temperature
125°C
Length
20.5mm
Standards/Approvals
ISO
Series
RI
Χώρα Προέλευσης
Belgium
Λεπτομέρειες Προϊόντος
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA