Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ATMIProduct Type
Float Switch
Mount Type
Cable
Switch Output
SPDT
Housing Material
Copolymer Polypropylene
Cable Length
5m
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Maximum AC Voltage
400V ac
Maximum DC Voltage
250V dc
Maximum Pressure
3.5bar
Standards/Approvals
No
Hazardous Area Certification
ATEX
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV).
Thanks to its wide switching angle of 110°, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 m.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 117,70
€ 117,70 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 145,95
€ 145,95 Μονάδας Με Φ.Π.Α
1
€ 117,70
€ 117,70 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 145,95
€ 145,95 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
ATMIProduct Type
Float Switch
Mount Type
Cable
Switch Output
SPDT
Housing Material
Copolymer Polypropylene
Cable Length
5m
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Maximum AC Voltage
400V ac
Maximum DC Voltage
250V dc
Maximum Pressure
3.5bar
Standards/Approvals
No
Hazardous Area Certification
ATEX
Χώρα Προέλευσης
France
Λεπτομέρειες Προϊόντος
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV).
Thanks to its wide switching angle of 110°, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 m.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.
