Bartec Plunger Limit Switch, NO/NC, IP54, Duroplast Housing, 250V ac Max, 5A Max
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BartecActuator Type
Plunger
Normal State Configuration
NO/NC
IP Rating
IP54
Maximum Current
5A
Housing Material
Duroplast
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Length
29.8mm
Minimum Operating Temperature
-40°C
Depth
10mm
Maximum Operating Temperature
+90°C
Hazardous Area Certification
ATEX
Width
18mm
Mechanical Life
10000000Cycles
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 235,98
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 292,62
Μονάδας Με Φ.Π.Α
1
€ 235,98
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 292,62
Μονάδας Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 235,98 |
| 5 - 9 | € 232,20 |
| 10+ | € 225,72 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BartecActuator Type
Plunger
Normal State Configuration
NO/NC
IP Rating
IP54
Maximum Current
5A
Housing Material
Duroplast
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Length
29.8mm
Minimum Operating Temperature
-40°C
Depth
10mm
Maximum Operating Temperature
+90°C
Hazardous Area Certification
ATEX
Width
18mm
Mechanical Life
10000000Cycles
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .