Bosch HSS-G, 75mm Overall 10
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BoschProduct Type
Drill Bit
Material
HSS-G
Number of Flutes
2
Flute Type
Twist
Overall Length
75mm
Number of Pieces
10
Shank Type
Cylindrical
Finish
Smooth
Shank Size
3.8mm
Drill Point Angle
135°
Cutting Direction
Right
Drilling Length
43mm
Standards/Approvals
DIN 338/1414
Χώρα Προέλευσης
China
Λεπτομέρειες Προϊόντος
Bosch HSS-G Metric Jobber Drill Bits (DIN 338)
Introducing the series of HSS-G Drill Bits from Bosch. These high-performance drill bits are designed to give a very clean, accurate holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron malleable cast iron, non-ferrous metals and hard plastic. The HSS-G drill bits enable up to 40% faster drilling rates and 50% lower feed pressure than standard HSS bits, with a chisel edge and split point drill tip manufactured to DIN338. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 30,50
€ 3,05 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 37,82
€ 3,782 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
10
€ 30,50
€ 3,05 Μονάδας (Σε ένα πακέτο των 10) (Exc. Vat)Χωρίς Φ.Π.Α
€ 37,82
€ 3,782 Μονάδας (Σε ένα πακέτο των 10) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
10
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BoschProduct Type
Drill Bit
Material
HSS-G
Number of Flutes
2
Flute Type
Twist
Overall Length
75mm
Number of Pieces
10
Shank Type
Cylindrical
Finish
Smooth
Shank Size
3.8mm
Drill Point Angle
135°
Cutting Direction
Right
Drilling Length
43mm
Standards/Approvals
DIN 338/1414
Χώρα Προέλευσης
China
Λεπτομέρειες Προϊόντος
Bosch HSS-G Metric Jobber Drill Bits (DIN 338)
Introducing the series of HSS-G Drill Bits from Bosch. These high-performance drill bits are designed to give a very clean, accurate holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron malleable cast iron, non-ferrous metals and hard plastic. The HSS-G drill bits enable up to 40% faster drilling rates and 50% lower feed pressure than standard HSS bits, with a chisel edge and split point drill tip manufactured to DIN338. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm.