ACPL-782T-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin DIP
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BroadcomPower Supply Type
Single
Typical Dual Supply Voltage
4.5 → 5.5V
Typical Single Supply Voltage
4.5 → 5.5 V
Isolation Mode Rejection
76dB
Rail to Rail
Rail to Rail Output
Mounting Type
Through Hole
Package Type
DIP
Pin Count
8
Height
4.7mm
Width
6.35mm
Length
9.8mm
Maximum Operating Temperature
125 °C
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 11,95
Μονάδας (Σε μία ράγα των 50) (Exc. Vat)Χωρίς Φ.Π.Α
€ 14,818
Μονάδας (Σε μία ράγα των 50) Με Φ.Π.Α
50
€ 11,95
Μονάδας (Σε μία ράγα των 50) (Exc. Vat)Χωρίς Φ.Π.Α
€ 14,818
Μονάδας (Σε μία ράγα των 50) Με Φ.Π.Α
50
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BroadcomPower Supply Type
Single
Typical Dual Supply Voltage
4.5 → 5.5V
Typical Single Supply Voltage
4.5 → 5.5 V
Isolation Mode Rejection
76dB
Rail to Rail
Rail to Rail Output
Mounting Type
Through Hole
Package Type
DIP
Pin Count
8
Height
4.7mm
Width
6.35mm
Length
9.8mm
Maximum Operating Temperature
125 °C
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products