ACPL-782T-300E Broadcom Optocoupler, 8-Pin
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BroadcomProduct Type
Optocoupler
Pin Count
8
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Width
6.35 mm
Length
9.8mm
Height
4.7mm
Λεπτομέρειες Προϊόντος
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 500,00
€ 10,00 Μονάδας (Σε μία ράγα των 50) (Exc. Vat)Χωρίς Φ.Π.Α
€ 620,00
€ 12,40 Μονάδας (Σε μία ράγα των 50) Με Φ.Π.Α
50
€ 500,00
€ 10,00 Μονάδας (Σε μία ράγα των 50) (Exc. Vat)Χωρίς Φ.Π.Α
€ 620,00
€ 12,40 Μονάδας (Σε μία ράγα των 50) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
50
| Quantity Ποσότητα | Τιμή μονάδας | Per Ράγα |
|---|---|---|
| 50 - 50 | € 10,00 | € 500,00 |
| 100 - 100 | € 9,14 | € 457,00 |
| 150 - 150 | € 8,25 | € 412,50 |
| 200+ | € 7,80 | € 390,00 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BroadcomProduct Type
Optocoupler
Pin Count
8
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Width
6.35 mm
Length
9.8mm
Height
4.7mm
Λεπτομέρειες Προϊόντος
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products