Broadcom HFBR-2412TZ 5Mbit/s 865nm Fibre Optic Receiver, ST Connector
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BroadcomMaximum Data Rate
5Mbit/s
Wavelength of Peak Sensitivity
865nm
Typical Rise Time
3.3ns
Typical Fall Time
3.3ns
Number of Pins
8
Mounting Type
Through Hole
Dimensions
27.2 x 12.7 x 10.2mm
Connector Type
ST
Height
10.2mm
Length
27.2mm
Width
12.7mm
Series
HFBR
Output Signal Type
TTL
Λεπτομέρειες Προϊόντος
HFBR-0400TZ Series Miniature Link Components
The HFBR-x4xxTZ series, from Avago Technologies, are miniature link components with the threaded ST port option. They come with 5.1mm (0.2 inch) of 3/8-32 UNEF-2A threads on the port.
Components with the threaded ST port have the same high electrical, optical and mechnical performance as that of the base components. The HFBR-x4xxTZ devices are suitable for panel mounting to chassis walls with a maximum thickness of 2.8mm (0.11 inch) when using nuts and washers from the kit.
Fibre Optics, Avago Technologies
€ 1.711,80
€ 28,53 Μονάδας (Σε μία ράγα των 60) (Exc. Vat)Χωρίς Φ.Π.Α
€ 2.122,63
€ 35,377 Μονάδας (Σε μία ράγα των 60) Με Φ.Π.Α
60
€ 1.711,80
€ 28,53 Μονάδας (Σε μία ράγα των 60) (Exc. Vat)Χωρίς Φ.Π.Α
€ 2.122,63
€ 35,377 Μονάδας (Σε μία ράγα των 60) Με Φ.Π.Α
60
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
BroadcomMaximum Data Rate
5Mbit/s
Wavelength of Peak Sensitivity
865nm
Typical Rise Time
3.3ns
Typical Fall Time
3.3ns
Number of Pins
8
Mounting Type
Through Hole
Dimensions
27.2 x 12.7 x 10.2mm
Connector Type
ST
Height
10.2mm
Length
27.2mm
Width
12.7mm
Series
HFBR
Output Signal Type
TTL
Λεπτομέρειες Προϊόντος
HFBR-0400TZ Series Miniature Link Components
The HFBR-x4xxTZ series, from Avago Technologies, are miniature link components with the threaded ST port option. They come with 5.1mm (0.2 inch) of 3/8-32 UNEF-2A threads on the port.
Components with the threaded ST port have the same high electrical, optical and mechnical performance as that of the base components. The HFBR-x4xxTZ devices are suitable for panel mounting to chassis walls with a maximum thickness of 2.8mm (0.11 inch) when using nuts and washers from the kit.