Carroll & Meynell 3 Phase 4.2kVA Autotransformer, 415V
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Carroll & MeynellPrimary Voltage Rating
415V
Power Rating
4.2kVA
Number of Phases
3
Termination Type
Clamp
Dimensions
160 x 180 x 646mm
Depth
646mm
Length
160mm
Width
180mm
Minimum Operating Frequency
50Hz
Construction
Open
Maximum Operating Frequency
60Hz
Χώρα Προέλευσης
Turkey
Λεπτομέρειες Προϊόντος
Carroll & Meynell 3 Phase Vairiable Transformers
Carroll & Meynell 3 phase transformers provide a trouble free and efficient way of varying and controlling AC voltages. Variation of the output voltage is achieved by a rotating arm and a carbon brush that rolls around a winding commutator.
These 3 phase variable autotransformers consist of three single phase variacs that are mounted on a common shaft and connected in the “star” vector configuration. The variacs are positioned so that the brush arms on each unit are matched.
This new range of autotransformers uses round carbon brushes, riding out any imperfection which gives a smoother operation. The round Carbon brush should last the lifetime of the unit.
Variable Auto Transformers
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 2.269,88
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 2.814,65
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 2.269,88
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 2.814,65
Μονάδας (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Carroll & MeynellPrimary Voltage Rating
415V
Power Rating
4.2kVA
Number of Phases
3
Termination Type
Clamp
Dimensions
160 x 180 x 646mm
Depth
646mm
Length
160mm
Width
180mm
Minimum Operating Frequency
50Hz
Construction
Open
Maximum Operating Frequency
60Hz
Χώρα Προέλευσης
Turkey
Λεπτομέρειες Προϊόντος
Carroll & Meynell 3 Phase Vairiable Transformers
Carroll & Meynell 3 phase transformers provide a trouble free and efficient way of varying and controlling AC voltages. Variation of the output voltage is achieved by a rotating arm and a carbon brush that rolls around a winding commutator.
These 3 phase variable autotransformers consist of three single phase variacs that are mounted on a common shaft and connected in the “star” vector configuration. The variacs are positioned so that the brush arms on each unit are matched.
This new range of autotransformers uses round carbon brushes, riding out any imperfection which gives a smoother operation. The round Carbon brush should last the lifetime of the unit.