Druck DPI 603 0bar to 20bar Pressure Calibrator
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
DruckMaximum Pressure Measurement
20bar
Minimum Pressure Measurement
0bar
Resolution
0.005 %
Model Number p
DPI 603
Current Loop Measurement
Yes
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-10°C
Dimensions
305 x 180 x 110mm
Height
110mm
Length
305mm
Width
180mm
Λεπτομέρειες Προϊόντος
DPI 603
A cost effective rugged portable instrument for calibration and service of pressure instrumentation. The instrument has the capability to generate pressures up to 20 bar and measure to an accuracy of ±0.075% FS. If the device under test is a pressure sensor, the instrument also measures the current or voltage output and displays it together with the pressure reading. An energising voltage of 24Vdc is provided for powering the device under test if necessary. A fixed current output of 12mA is also provided for loop verification and this can be used in a sink or source mode.
Supplied with
user handbook, user guide, carrying case, shoulder strap, electrical leads and probes and a blanking plug for the pressure port.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
DruckMaximum Pressure Measurement
20bar
Minimum Pressure Measurement
0bar
Resolution
0.005 %
Model Number p
DPI 603
Current Loop Measurement
Yes
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-10°C
Dimensions
305 x 180 x 110mm
Height
110mm
Length
305mm
Width
180mm
Λεπτομέρειες Προϊόντος
DPI 603
A cost effective rugged portable instrument for calibration and service of pressure instrumentation. The instrument has the capability to generate pressures up to 20 bar and measure to an accuracy of ±0.075% FS. If the device under test is a pressure sensor, the instrument also measures the current or voltage output and displays it together with the pressure reading. An energising voltage of 24Vdc is provided for powering the device under test if necessary. A fixed current output of 12mA is also provided for loop verification and this can be used in a sink or source mode.
Supplied with
user handbook, user guide, carrying case, shoulder strap, electrical leads and probes and a blanking plug for the pressure port.