Eaton 3P+N Pole Surface Mount Isolator Switch - 32A Maximum Current, 15kW Power Rating, IP65
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
EatonNumber of Poles
3P+N
Maximum Current
32A
Mounting Type
Surface Mount
IP Rating
IP65
Power Rating
15kW
Voltage Rating
690V ac
Accepts Padlocks
Yes
Handle Colour
Red
Series
EATON MOELLER
Model Number
P1-32/I2-SI/N
Normal State Configuration
NO/NC
Switch Rating
320A
Length
100mm
Width
115mm
Depth
160mm
Terminal Type
Screw
Throw Configuration
NO/NC
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
-25°C
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Eaton Non-Fused Switch Disconnectors - P1 Series Isolators
The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 154,03
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 191,00
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 154,03
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 191,00
Μονάδας (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
EatonNumber of Poles
3P+N
Maximum Current
32A
Mounting Type
Surface Mount
IP Rating
IP65
Power Rating
15kW
Voltage Rating
690V ac
Accepts Padlocks
Yes
Handle Colour
Red
Series
EATON MOELLER
Model Number
P1-32/I2-SI/N
Normal State Configuration
NO/NC
Switch Rating
320A
Length
100mm
Width
115mm
Depth
160mm
Terminal Type
Screw
Throw Configuration
NO/NC
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
-25°C
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Eaton Non-Fused Switch Disconnectors - P1 Series Isolators
The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.