Electromen OY DC Motor Controller, 10/35 V dc, 15 A, Potentiometer Function
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Electromen OYProduct Type
DC Motor Controller
Control Function
Potentiometer
Output Voltage
12/24 V
Supply Voltage
10/35 V dc
Current Rating
15 A
Overall Length
45mm
Overall Width
80mm
Overall Depth
45 mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
60°C
Standards/Approvals
No
Χώρα Προέλευσης
Finland
Λεπτομέρειες Προϊόντος
EM-24xA DC-Motor Controller
The EM-241A/ EM-243A are full bridge DC-motor starters. It is designed to work with DC-motor in applications where some special functions are needed.
Starter has adjustable acceleration and deceleration ramps, which make possible the smooth starts and stops. Adjustable current limit protects motor against overcurrent and it can also be used as an end-stop. This device has also two settable speeds, which are useful in positioning applications.
The parameters are set with EM-236 interface unit. Operation of the controller and some of its functional values can also be monitored with EM-236 interface unit.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 168,39
€ 168,39 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 208,80
€ 208,80 Μονάδας Με Φ.Π.Α
1
€ 168,39
€ 168,39 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 208,80
€ 208,80 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Electromen OYProduct Type
DC Motor Controller
Control Function
Potentiometer
Output Voltage
12/24 V
Supply Voltage
10/35 V dc
Current Rating
15 A
Overall Length
45mm
Overall Width
80mm
Overall Depth
45 mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
60°C
Standards/Approvals
No
Χώρα Προέλευσης
Finland
Λεπτομέρειες Προϊόντος
EM-24xA DC-Motor Controller
The EM-241A/ EM-243A are full bridge DC-motor starters. It is designed to work with DC-motor in applications where some special functions are needed.
Starter has adjustable acceleration and deceleration ramps, which make possible the smooth starts and stops. Adjustable current limit protects motor against overcurrent and it can also be used as an end-stop. This device has also two settable speeds, which are useful in positioning applications.
The parameters are set with EM-236 interface unit. Operation of the controller and some of its functional values can also be monitored with EM-236 interface unit.