E-shop

Τα προϊόντα μας αποστέλλονται από διάφορες αποθήκες στο εξωτερικό, με την κύρια αποθήκη μας να βρίσκεται στο Ηνωμένο Βασίλειο, διασφαλίζοντας γρήγορη και ασφαλή παράδοση σε εσάς.

Entrelec BJD Series Jumper Bar for Use with DIN Rail Terminal Blocks

Κωδικός Προϊόντος της RS: 454-801Κατασκευαστής: EntrelecΚωδικός Κατασκευαστή: 1SNA178032R2500
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Accessory Type

Jumper Bar

Series

BJD

For Use With

DIN Rail Terminal Blocks

Χώρα Προέλευσης

France

Λεπτομέρειες Προϊόντος

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

Μπορεί να σας ενδιαφέρει
Weidmuller Q Series Jumper Bar for Use with DIN Rail Terminal Blocks, 24A
€ 10,404Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 7,79

Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α

€ 9,66

Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α

Entrelec BJD Series Jumper Bar for Use with DIN Rail Terminal Blocks

€ 7,79

Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α

€ 9,66

Μονάδας (Σε ένα πακέτο των 5) Με Φ.Π.Α

Entrelec BJD Series Jumper Bar for Use with DIN Rail Terminal Blocks
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Μπορεί να σας ενδιαφέρει
Weidmuller Q Series Jumper Bar for Use with DIN Rail Terminal Blocks, 24A
€ 10,404Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α

Τεχνικό φυλλάδιο

Προδιαγραφές

Accessory Type

Jumper Bar

Series

BJD

For Use With

DIN Rail Terminal Blocks

Χώρα Προέλευσης

France

Λεπτομέρειες Προϊόντος

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

Μπορεί να σας ενδιαφέρει
Weidmuller Q Series Jumper Bar for Use with DIN Rail Terminal Blocks, 24A
€ 10,404Μονάδας (Σε ένα πακέτο των 5) (Exc. Vat)Χωρίς Φ.Π.Α