Ewellix LBHT 25 A-2LS, Bearing with 40mm Outside Diameter

Τεχνικό φυλλάδιο
Προδιαγραφές
Inside Diameter
25mm
Outside Diameter
40mm
Length
58mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Open
Seals
Without Seals
Dynamic Load Rating
4900N
Static Load Rating
5100N
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
LBCT/LBHT Ball Bushings - Open
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
€ 183,43
€ 183,43 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 227,45
€ 227,45 Μονάδας Με Φ.Π.Α
1
€ 183,43
€ 183,43 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 227,45
€ 227,45 Μονάδας Με Φ.Π.Α
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
Τεχνικό φυλλάδιο
Προδιαγραφές
Inside Diameter
25mm
Outside Diameter
40mm
Length
58mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Open
Seals
Without Seals
Dynamic Load Rating
4900N
Static Load Rating
5100N
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
LBCT/LBHT Ball Bushings - Open
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.