Festo Pneumatic Guided Cylinder - 170863, 32mm Bore, 200mm Stroke, DFM Series, Double Acting
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
FestoStroke
200mm
Bore
32mm
Manufacturer Series
DFM
Action
Double
Bearing Type
Ball Bearing
Pneumatic Connection
G 1/8
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170863
Model Number (p)
170863
Dimensions
319 x 110 x 49mm
Weight
4.8kg
Maximum Operating Temperature
+80°C
Length
319mm
Height
49mm
Minimum Operating Temperature
-20°C
Width
110mm
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 835,65
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.036,21
Μονάδας Με Φ.Π.Α
1
€ 835,65
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.036,21
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
FestoStroke
200mm
Bore
32mm
Manufacturer Series
DFM
Action
Double
Bearing Type
Ball Bearing
Pneumatic Connection
G 1/8
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170863
Model Number (p)
170863
Dimensions
319 x 110 x 49mm
Weight
4.8kg
Maximum Operating Temperature
+80°C
Length
319mm
Height
49mm
Minimum Operating Temperature
-20°C
Width
110mm
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.