Fluke I410 Multimeter Current Clamp Adapter, 400A DC Max, AC/DC Adapter, 400A ac AC Max, Voltage Output - RS Calibrated
Technical Document
Specifications
Brand
FlukeAdapter Type
AC/DC
Maximum DC Current
400A
Maximum ac Current
400A ac
Best Accuracy
±3.5% + 0.5 A
Maximum Conductor Size
30mm
Calibrated
RSCAL
Safety Category
CAT III 600V
Output Type
Voltage
Connector Type
4 mm Plug
Battery Type
9 V
Battery Life
60 h
Model Number p
I410
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-10°C
Safety Category Level
CAT III
Safety Category Voltage
600V
Country of Origin
Thailand
Product details
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.
€ 682.07
€ 682.07 Each (Exc. Vat)
€ 845.77
€ 845.77 Each (inc. VAT)
Calibration type
RS Calibration
1
€ 682.07
€ 682.07 Each (Exc. Vat)
€ 845.77
€ 845.77 Each (inc. VAT)
Calibration type
RS Calibration
1
Stock information temporarily unavailable.
Please check again later.
Technical Document
Specifications
Brand
FlukeAdapter Type
AC/DC
Maximum DC Current
400A
Maximum ac Current
400A ac
Best Accuracy
±3.5% + 0.5 A
Maximum Conductor Size
30mm
Calibrated
RSCAL
Safety Category
CAT III 600V
Output Type
Voltage
Connector Type
4 mm Plug
Battery Type
9 V
Battery Life
60 h
Model Number p
I410
Maximum Operating Temperature
+50°C
Minimum Operating Temperature
-10°C
Safety Category Level
CAT III
Safety Category Voltage
600V
Country of Origin
Thailand
Product details
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.