Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 0,25
Μονάδας (Σε ένα καρούλι των 500) (Exc. Vat)Χωρίς Φ.Π.Α
€ 0,31
Μονάδας (Σε ένα καρούλι των 500) (Including VAT) Με Φ.Π.Α
500
€ 0,25
Μονάδας (Σε ένα καρούλι των 500) (Exc. Vat)Χωρίς Φ.Π.Α
€ 0,31
Μονάδας (Σε ένα καρούλι των 500) (Including VAT) Με Φ.Π.Α
500
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας | Per Καρούλι |
---|---|---|
500 - 1000 | € 0,25 | € 125,00 |
1500 - 2500 | € 0,23 | € 115,00 |
3000 - 4500 | € 0,23 | € 115,00 |
5000+ | € 0,23 | € 115,00 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Contact Plating
PdNi
Termination Method
Crimp
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Minimum Wire Size AWG
24AWG
Maximum Wire Size AWG
20AWG
Χώρα Προέλευσης
Germany
Λεπτομέρειες Προϊόντος
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807